A correct understanding of ink cartridges

Misunderstanding 1: ink cartridges can be added without restriction

Many people believe that only a dress ink cartridge container only as long as the cartridge does not rupture the surface, you can continue to add ink. In fact, this is a big misunderstanding.

First, the sponge inside the cartridge have a certain life span, when the sponge repeatedly, "Absorption - the release of" ink in the process or use more than a certain time after the ink sponge capacity will be reduced, so that filled into the cartridge sponge ink will not be completely absorbed within the ink cartridge to the nozzle part of the pressure will become large, resulting in outflow of ink from the nozzle. This is a lot of people complain about the amount of filling ink printing ink than original one reason.

More serious is that the printer can not monitor this diversion to the waste ink pad ink, it may lead to waste ink pad is much larger than the actual amount of waste ink out of the printer to monitor the amount of waste ink, so that the printer has not yet issued a waste ink super-capacity alarm Waste ink already overflow, causing damage to the printer.

Secondly, in the ink cartridge with the nozzle into the mouth to rely on a rubber seal between the cartridge and the nozzle seal guarantees to ensure the ink does not leak. Long-term use or repeated extraction cartridge will cause the ring aging, sealing effect of variation, leading to ink leakage from the junction, so that would make the ink in the nozzle on the accumulation and mixing, resulting in the bottom of the ink blending, the result is printed direct When artwork color, need to print more than one artwork to return to normal after the color. This situation can lead to a waste of ink and printer increase in the amount of waste ink.

Third, both filled with more good ink, after filling several times there are some impurities or dust being brought into the cartridge inside. The dust in the ink flow will be taken and absorbed on the filter cartridges online, with the increase in dust, cartridge filter would be blocked, resulting in poor ink flow, so that when printing broken and so on. And if filter completely blocked, it may be unable to printing fault.

Therefore, the ink filling more than 10 times, or an ink cartridge to use more than one year, it is best to consider a replacement cartridge to avoid problems.

Misunderstanding 2: Printer waste ink ultra-exclusive, can be cleared with the program

Recently, the printer before the waste ink Refill ultra-capacity problem in the forum discussions were also very enthusiastic. Many of my friends that the waste ink super-later only need to run the printer maintenance program, the printer waste ink counter is cleared on it.

In fact, maintenance procedures, just cleared of waste ink in the printer waste ink counter is cleared, the printer because of nozzle cleaning, Power On Self Test of waste generated by such factors as ink remains. If we just waste ink counter will be cleared, rather than cleaning the printer waste ink pad, then the printer continue to work in the process of waste inside the waste ink pad ink will continue to increase. Once the printer waste ink pad is full of waste ink, waste ink is likely to flow.

If the waste ink flow to the printer's power or control panel, it will cause short-circuit board, resulting in damage to the printer. Even if waste ink does not overflow, when the printer case of excess waste ink, waste ink pad will be volatile steam out of the printer circuit board, action agencies and even spray damage.

Of course, there are some of my friends think that when the printer waste ink hypervolemic warning, waste ink pad inside the waste ink is not full, do not need to clean waste ink pad. Indeed, in many places (especially the southern high-temperature region) when the alarm printer waste ink, waste ink pad, and there is little ink, combined with the printer alarm left a certain margin, so many friends to bring "no risk" impression. But we can not be a waste ink pads do not need to clean up the grounds, just because the waste ink pad ink, there are many variables, such as the high and low temperature, air humidity, the size of the printer whether Lou Mo, etc., but, even if the first a waste ink alarm when there is no overflow of waste ink, then the second, third police called in?

The author proposed here is to consider changing the factory will be designed to move the printer cartridge waste, the damage to the printer to avoid the overflow of waste ink it?

Misunderstanding 3: Use a permanent chip allows the printer does not wash nozzle, provincial and ink

Even for systems with the promotion of a permanent chip printer cartridges have also been used quite a few friends. Is now a permanent chip generally has two functions: First, do not decode, so long as the printer off, on-chip counters will be cleared, so the printer that the ink cartridge is full. Second, clean nozzle-free, meaning that the printer does not perform after boot nozzle cleaning action, you can save some ink.

It is because of these advantages of a permanent chip, many are not used even for ordinary users the system will also be replaced with a chip on the cartridge chip permanent. However, as the user's daily average volume of small print, if the printer a long time unused, the inevitable result of the ink within the nozzle of water evaporation caused by viscosity increase or dry plug. This can only rely on the printer the boot time self-cleaning nozzle to solve the problem. The installation of a permanent chip, the printer will not boot cleaning nozzle, only the user is not normally found in print only clean nozzle, so that not only can not save ink, will lead to more printing paper and ink waste.

Of course, even for large print volume for the users of the system, since the daily need for a lot of printing, the ink yet to dry out the ink was new and therefore not prone to clogging phenomenon. But many users reflect the system in use for a period of time even after the print quality decreased. It has been argued this is because the ink nozzles or the bad result of aging, but once a connection for the system to use the printer for cleaning nozzle, the second series of articles in use in the method of checking nozzle found although there are many nozzles be able to spray ink, but the spray of ink there is a clear bifurcation phenomenon, and in the cleaning nozzle end, the print quality has increased.

The reason for this is there is something in the nozzle part of the blocked part of the nozzle, making the test page prints, because some of the ink spray nozzle can, therefore, not easy to feel such a plug. However, this blockage will lead to smaller ink droplets emitted, so that drop coverage in the paper shortage, while also lead to the ink fly spray ramp to generate offset positioning of the paper, so printing out the graph The following is issued on the people feel coarse particles.

Nozzle clogging caused by some of the reasons for and the use of a permanent chip, the printer heads clean boot does not have a certain relationship. Use a permanent chip does not automatically clean the printer nozzle, but also because the user does not feel blocked without washing. In this way, impurities are likely to prolonged adhesion of the walls of the nozzle and becomes not easy to be cleaned. When the print was found ineffective until further nozzle cleaning can not bring about these impurities had. Therefore, I propose that we in the adoption of a permanent chip, it is best not to use the chip-free nozzle clean.