Common Faults and inkjet printers to resolve the eight

Inkjet printer in a long time for us to "service" process, the occurrence of the fault phenomena of all kinds of strange almost inevitable; to ensure that inkjet printers can work effectively, many caring people on the frequent failures and ink-jet printing troubleshooting process was concluded, as if the future event of failure of the same phenomenon can be well prepared to carry out targeted quickly ruled out. This does not, this specially compiled the work of ordinary inkjet printers in the long process of the emergence of some failures, and resolve them one by one, hope the following will give you the contents of a friend a friend in the future to bring the material printed in the Enlightenment.

   Fault 1, the most recent period, the Office of the inkjet printer unit almost every day implementation of the automatic cleaning operation, does this phenomenon normal?

Under normal circumstances, ink-jet printers are generally not frequent self-cleaning nozzle, and if we encounter this phenomenon, unfortunately, that most inkjet printers in the control circuit is malfunctioning. Automatic nozzle cleaning operation is based on inkjet printer settings and the actual usage will be necessary if frequent cleaning or nozzle operator to carry out non-stop cleaning operation, is probably the procedure nozzle inkjet printer control disorders occurred phenomenon, then we must be promptly sent to a professional repair station to repair. Taking into account the more sophisticated inkjet printers are electromechanical integration equipment, ink jet printer board control chip precision machinery parts in all the co-ordination to the accurate implementation of feed operations, taking paper operations, the paper operating and to move the print head operation, finally the accuracy of the contents of the target material printed in the corresponding print paper. Frequently encountered in the print heads need cleaning problem, not necessarily their own problems to print nozzles may also be related to the supply and printing ink systems, Chu ink system or print control circuit malfunctioned, these factors can cause print nozzle cleaning operation occurs frequently.

Fault 2, ink-jet printer using a CISS way, the print nozzles by injury, using a model different from the same type of inkjet print head to be replaced, will this replace the way it can use?

As we all know, the nozzle is the most sophisticated ink-jet printer device, one of the most important components, in addition to requirements in the production of the manufacturing process is very rigorous process, to protect the production environment, but also on the storage, transportation, installation, replacement and so on link, there are strict requirements that any irregularities, improper operation may result in serious injury to print nozzles quality arises directly or scrapped off. Although many of the printer type, the same series of brand inkjet printer to print nozzles may encounter each other a common situation, but the general need to be replaced manual methods we use to install, and this operation often requires high precision Therefore, we must not free to use other types of inkjet print head replacement, in order to avoid damaging the output of ink-jet printer heads, so bring on unnecessary economic losses.

Fault 3, using the inkjet printer to print out black and white document, we often find that the printed page in the horizontal line contains one color, while the horizontal line showed irregular arrangement.

When we encounter the output color is not correct, Lou Mo, plug and other phenomena, or the use of face inkjet printer to print black and white document, color dash, we probably will be able to judge the phenomenon is caused by ink-jet print head damage. In general, ink jet print head causing more damage to the reasons, but generally can be divided into hard failures and soft failures. From the above description of the fault, we think it should be inkjet nozzles physical damage occurred, so we have time to ink-jet printer to be sent to the designated maintenance point for replacement print heads. If the print cartridges and the nozzles are integrally linked, and that we should not hesitate to replace the print cartridges.

Failures 4, a sheet-fed inkjet printer capable of printing, but also print out the contents of two or more will automatically stop the printing, while inkjet printers will be in the power light flashing state, when the user disconnects print print When the power plug in, print inkjet head will be issued by a strange sound, despite the inkjet printer can properly reset, but the problem will be repeated.

Once the failure phenomena encountered in most cases when a foreign body accidentally into the inkjet printer or some printer's mechanical parts wear aging occurred, causing the smooth running vehicle can not print the word and may even lead to print the word car stuck death. Therefore, to the extent possible, to extend the service life of mechanical components of the printer, we recommend that you try to use ordinary print materials are slightly better quality printing paper, and placed in use and must be closed when the ink jet printer inkjet printer cover to avoid printing paper scraps, dust and other air-mechanical components of the printer. If some of the print component to print the word vehicle can not wear and tear caused during normal operation, we should be inkjet printer to go to the designated repair station for maintenance.

Failure 5, inkjet printers, when you start self-test, print the word belt and motor vehicle issued by a strange sound. And when the printer every time you start will occur, but during the course of printing materials inkjet printer has all the normal, does this phenomenon normal?

In fact, this is not a normal phenomenon. Although inkjet printers in the course of their work may sound, but the printed word belt and motor vehicles should not happen between the abnormal sound. Once accidentally ran into this phenomenon, we should first check carefully for any foreign matter into the inkjet printer is not careful internal. If a foreign body accidentally entering the case, often lead character inkjet printers and other related motor vehicles and parts increased load of the word car or virtually scratch belt, this time we take a serious reference to the printer built-in installation manual carefully remove them the foreign body. If the foreign body was found inside the inkjet printer has entered into a deep position or place cards death phenomenon, we must servicing to qualified service personnel to repair. Need to remind our friends to note that this type of ink-jet printer to print the reason why failures occur, probably because we used the Continuous Ink Supply System of relatively times and Jianrong cartridges, which can easily lead to Loumo accident, and leak out printing ink inkjet printer mechanical parts will increase the running resistance, the use of CISS inkjet printer to print additional pipeline will print the word motor car and an additional burden.

Failure 6, inkjet printer in the printing process, there is not continuous color bars appear. Playing a test page, find the blue and light blue color block distribution of problems, location is incorrect, and the hole in question is uncertain.

There are two possible fault occurs, first of all cartridges in question, or the ink is insufficient, or non-genuine cartridges; second is also possible that the printer uses a longer time, pumps and pump accessories, component wear, resulting in inadequate sealing. Troubleshooting way to first check the ink cartridge installation location is correct. Users can in accordance with the "user manual" and printer cartridges body marking installation order to install cartridges. When the nozzle test proofs appear disconnected, you can perform 1 to 2 times the cleaning operation (washing operation consumes some ink, we recommend the implementation of cleaning operations to no more than 3 times, also to improve the cleaning efficiency, you can try in every second cleaning operation for some time standing between the printer). If the cleaning operation is invalid, can only be sent to the service center for repairs.

Fault 7, inkjet printer line when loading print driver, the computer system can not find the pop-up prompts to tell us inkjet printer equipment, carefully check the printing power and connections, we found that they are normal, the same time I had a new print has been replaced data line, and use the printer driver is downloaded from the official website come. When I try to check the operation of the printer to skip, and load the print driver, the inkjet printer can not print properly and that prompted the unknown error.

The inkjet printer problems encountered, we may wish to carefully check the printer driver, access to its property interface print port is set to see whether the actual use of the same print port. In general, the default printer port on the computer must be careful to view, Once the port mismatch must be immediately changed. Furthermore, the inkjet printer installation process may occur during the phenomenon of conflict, for example, HP's brand of jet printing with Epson brand stylus while installed on the same computer, it is easy to appear incompatible phenomena, Then we may try to fault the printer with other computers connected directly to determine whether the current failure caused by the printer hardware or software.

Fault 8, sometimes we will find the process of inkjet printers at work no ink, and cleaning print heads when the control panel in the ink into the paper lamps and lamp together will be in the long bright state, the other lights are in not on the state. Press the control panel by hand into the paper light and ink lights, they did not even respond.

Unfortunately, this failure phenomena encountered, the most likely part of the inkjet print head circuit problems, or the head accidentally disconnected the cable, so that electrical signals can not normally pass the print head. In general, this print fault is relatively complex, often through general inspection to solve the problem, so we need to get your goods to professional service center to resolve.