Five fault printer to print a simple maintenance

Now the printer has become the people's work and life frequently used computer products, and because it is frequently used products, they often encounter a number of issues one way or another. Now I will brief you on some simple maintenance methods.

    First, print and preview different

    General this situation is occur in a text editor, and common, such as Word or WPS, etc., when in preview format obviously is neat, but print them out to find some fonts overlap. This is generally due to improper editing settings, and its solution is a change of file "Page Properties" in the paper size, paper type, number of words per line, usually can be resolved.

    Second, print handwriting is not clear

    This problem is usually very common to use the printer, in general, is largely a hardware failure and related problems encountered in general should be noted that some of the key parts of the printer. We are here to inkjet printers in the example, the experience of fuzzy color printing products, fonts, the situation is not clear, you can lock in the nozzle failure, the first of the print head for automatic washing machine, if not successful than you can with a soft absorbent wipe the paper strong place near the print head; If the above method still can not resolve them, only to re-install the printer driver has.

    3, can not print large files

    This situation occurred in the laser printer are more likely to print a small file, or normal, but will crash when printing large files, this problem is software problem, you can view the remaining hard disk space, delete some useless files, or check the amount of memory the printer, whether expansion.

    Fourth, select the printer to print no response after

    General In such cases, the system will usually prompt "Please check the printer is on-line and cable connection is normal." General reason may be that the printer power cord is not plugged; print cable is not connected properly; poor contact; computer parallel port, etc. damaged. Members solution mainly in the following categories:

    1. If you can not start properly (that is, the power light is not lit), first check the printer's power cord is properly connected, in the shutdown state, re-plug the power cord again, and for an outlet to try to see whether the solution.

    2. If you press the power switch the printer to print the normal start, on the BIOS settings, and then take a look into the parallel port settings. The general use of the ECP printer mode, but some printers do not support ECP mode, then used ECP + EPP, or "Normal" mode.

    3. If the above two methods are ineffective, you need to focus on check printing cable, first turn off the computer, the printer cable re-inserted about 2 pull down, careful not to live swap. If the problem still can not solve it, try another printer cable, or alternative method.

    5, the print is not completely

    If you encounter this problem, you can say for sure that is caused by a software failure, you can change the printer interface settings, choose "Start ¡ú Settings ¡ú Control Panel ¡ú System ¡ú Device Manager ¡ú ports ¡ú Printer port ¡ú Driver ¡ú Driver changes Programs ¡ú Show all devices "will" ECP Printer Port "to" printer port "confirm.

    Several methods mentioned above are all more common to use the printer on the fault, and indeed the failure to resolve the main printer or judge, as long as the reason to find fault, we can by way of hardware or software methods of repair.