Inkjet printer maintenance and Maintenance

Some users do not pay attention to the use of inkjet printers skills, not on inkjet printer maintenance. This would inevitably generate some printer problems. Therefore, some inkjet printers necessary to master the daily use and maintenance skills, be able to avoid some problems. The following describes some of this writer's knowledge.

In short, if frequently used, as long as no problems are not overloaded with work, and if time is not the case, took out cartridges removed, so blocking the print head. Use when re-stuffed into the herd.

1, the internal dust Notes

Inkjet printer cover open, you can work for dust.

Needs to be done mainly two:

1, with a soft damp cloth inside the printer remove dust, stains, ink stains and broken scraps of paper;

2, if too much dust can cause a bad word car guide shaft lubrication, so the print head's movement in the printing process blocked, use a dry Q-tip axis erase the dust and oil derivative, and added a better lubricant mobility such as sewing machine oil.

Dust inside the printer when the inkjet Note:

1, do not wipe gear, do not wipe the print head and ink cartridges in the vicinity of the area;

2, in general, do not move the print head, especially in some of the printer's print head in a mechanical lock, hands can not move the print head, move the print head if the force force, will cause mechanical damage to the printer;

3, no paper products (such as facial tissue) Clean inside the printer, so that the machine left scraps of paper;

4, can not use volatile liquids (such as thinner, gasoline, spray type of chemical cleaning agents) clean the printer, so as not to damage the printer surface.

Second, the replacement cartridges Notes

Replacement cartridge must follow the operating manual steps. Printer ink capacity of the measurement is to use the printer's internal electronic counter to count, in cartridge replacement process, the printer will carry out its internal reset the electronic counter, thus confirming the installation of a new cartridge.

Replacement cartridges, please note the following:

1, can not touch the cartridge outlet to prevent contamination of ink cartridges;

2, do not throw hit cartridge to prevent leakage of ink.

3, with conductive ink, sprinkle on the board if the leak should be wiped off using ethanol, dried in the air and then electricity, or they may damage the circuit components;

4, ink box office should be from light in the dust, storage temperature should be -10 ¡æ - +35 ¡æ between.

Third, clean the print head notes

Most inkjet printers will automatically start cleaning the print head, and there are buttons on the print head cleaning, such as the Canon BJC-610 inkjet printers with fast cleaning, routine cleaning and thorough cleaning third gear cleaning, concrete cleaning operation Please refer to ink-jet printer operation manual steps. If the printer's self-cleaning function does not work, manual cleaning of the print head. Hand washing should be manual steps in the demolition of the print head.

Hand cleaning the print head can be set a length in front of medical syringes small hose, mounted flush with water filtered by the strict, careful observation with a magnifying glass when washing nozzle, such as the deposition nozzle next to the remnants, can eliminate the soft rubber products .

The integration of long-term unused print head as the ink dried up and plug the nozzle, and then soaked in clean water available.

Cleaning the print head should note the following:

1, do not use sharps cleaning nozzles, sprinklers can not hit, do not touch the nozzle;

2, can not be charged under demolition, installation of sprinklers, hand or other objects do not print the word vehicle electrical contact with contact;

3, can not be unloaded from the printer nozzles placed alone, can not spray on the dusty place.