To save ink printing method of

There is an increasing number of families are beginning to have inkjet printers, but due to ink-jet printer is relatively "spoiled" and usage is also "quite pay attention to," so it efficiently in order for their work on the must master some of the operational know-how. After several years of experience I have summarized the use of inkjet printer out of a few experiences here to share with you is to let you have a very of a sub-ink printing.

1, as far as possible the use of economic print mode

 Now a relatively new ink-jet printers have increased "economic printing mode", it was reported the use of this model can save more than half of the ink, and the substantial increase in printing speed, but I found the actual effect of not so exaggerated, speed is increased , ink only saving about 30%. Of course, if you want to print graphics, then I suggest you still do not use "economic printing mode", the effect is not very good, but most of the text, basically there is no problem.

2, cleverly set the page layout

   Sometimes we print a long document, but the document did not actually order is good, it is easy to waste paper, we can print the document, through some clever typesetting technology, try to focus on the content to a page up, economic model and then combined, then on to waste even more ink, but also can save some paper.

3, try to focus on print

 The use of inkjet printers, when the worst is printed once every other a few minutes, if you need to print a lot of things, I suggest that you will need to print something together to print. Since the start time of each ink-jet printer, the printer must clean the print head and initialization printers, ink delivery systems for filling ink, this process will have to waste more ink, so try not to start the printer frequently.

4, the correct cleaning print head

Most inkjet printers will automatically start cleaning the print head, and there are buttons on the print head cleaning, such as the Canon BJC-610 inkjet printer with the rapid cleaning, routine cleaning and thorough cleaning stalls of cleaning, concrete cleaning operation Please refer to ink-jet printer operation manual steps. If the printer's self-cleaning feature will not work, you can manually clean the print head. Hand washing should be manual steps in the demolition of the print head. Hand washing print head can be set a length in front of medical syringes thin hose, filling with water filtered through the rigorous washing, rinsing carefully observed with a magnifying glass when the spray holes, such as the spray-hole next to the remnants of silt that can be used soft, Polystyrene Clear . The integration of long-dormant print head clogging due to ink drying up and the spray holes, can be soaked in hot water after washing. Cleaning the print head should note the following points: A, do not use sharp objects cleaning nozzle and can not impact sprinklers, do not hand contact with nozzles; B, can not be charged state dismantling, installing sprinklers, do not touch their hands or other items on the nozzle Electric contact; C, can not be unloaded separately from the printer nozzles placed nozzle can not be placed in dusty places.

5, select the appropriate model of their own printing

Economic model is based on reducing the cost of print quality to save ink. Although a satisfactory standard mode printing is costly, we can make their own adjustments print density, and even define their own print mode, so as to achieve the purpose of saving ink. However, one group of settings for different ink cartridges and paper, the results will certainly be different, you can also do some minor adjustments before printing in order to achieve the best.

6, do not immediately replace the cartridge

We know that inkjet printers is through inductive sensors to detect the amount of ink cartridge, the sensor which detects the same color ink as long as the amount is less than the value set within the printer, they are prompted to replace the cartridge. At this time, we can remove the cartridge enables the printer to reset the internal sensors to determine to install a new cartridge.

7, the correct selection of compatible ink

At present, many printers can use compatible cartridges, in fact, doing so, it appears to be a temporary cost savings, but long before they came to the ink-jet printer, or some of the damage, so we would prefer to fill to the original ink cartridges compatible ink inside, and do not easily use of non-original ink cartridges, because most have sponge inside the cartridge, non-original ink cartridges the dissolution of its sponge material more, out of ink I use mainly the stainless steel filter is easy to cause nozzle clogging. Therefore, the use is compatible with original ink cartridges is to add a more reasonable solution.

8, reducing cleaning frequency

Inkjet printers use ink-jet heads often occur during the phenomenon of congestion, resulting in blockage of the many reasons, such as printers work environment, the quality of the printer ink, printer, idle time, etc., because each time ink-jet head cleaning should consume a large amount of ink, it should be cleaned to minimize the number of inkjet heads, of course, should pay attention to the use of the printer using the printer manufacturers to specify the model as much as possible ink.